ARTIE- Reverb & Delay Guitar Pedal

The ARTIE^TM guitar pedal combines Reverb, Delay, and Modulation effects into one Easy-to-Use pedal. We designed the effects to be natural sounding to add fullness to the tone of your guitar.

• REVERB is an effect that mimics the reverberation you get in a room as the sound bounces off walls and floors. We add a very slight delay so that your original strum or pick is heard clearly, then the reverb effect kicks in.
  • FEATURES:
    • ON/OFF FOOTSWITCH: True bypass footswitch that turns the effect on or off. It includes a BLUE indicator light when the effect is on.
    • REVERB SELECTOR: The toggle switch allows you to select from three different reverb types.
      • ROOM: This setting mimics the reverb in a bedroom. It is subtle but very natural sounding. 
      • HALL: This setting mimics a concert hall, with longer reverb swells. 
      • LUSH: Just like it sounds, you can get a very full reverb effect that seems to wash over your tone. It's very dreamy sounding with a long swelling reverb tail. Also great for surfer music.  We added the infamous "Abbey Road EQ" setting here so that the lush effect sounds very musical- it eliminates the low-end boominess that can sound cluttered and overwhelming and also cuts out the high frequencies that can be screechy and annoying. 
        • DECAY: Adjust the reverb length from 0 seconds to infinity (yeah, this is kinda crazy but it's there if you want to get creative!)
    • DECAY: Adjust the length of time that the reverb will sound after your strum or pick. The decay time is different for each setting listed above.
    • TONE: Adjust the tone from a full body, warm-sounding reverb to a shimmering high-end sounding reverb, and anywhere in between. Tone only affects the reverb signal. Your original signal is left alone.
    • REVERB MIX: Adjust the mix between your dry signal (non-affected tone) and the wet signal (reverb-affected tone). This is the best way to keep your output sounding natural and cut through the mix with a band.
• DELAY can be used to provide fullness with repeating echos. We use a digital delay to get crisp-sounding repeats. Go from very short "slapback" country sounds to long repeats for guitar solos! We also added a MOD setting so that you can sound like 80's a new wave or heavy metal! 
  • FEATURES:
    • ON/OFF FOOTSWITCH: True bypass footswitch that turns the effect on or off. It includes a YELLOW indicator light when the effect is on.
    • DELAY SELECTOR:
      • OG: This is an original type delay setting. This is great for rock and blues. Adjust the time between each repeat from 20ms to 1.5 seconds. 
      • SLAPBACK: This short repeat is great for Country and Rockabilly 50's style playing. Adjust the time between each repeat from 20 ms to 220 ms. 
      • MOD: We added a modulated effect to the delay for 80's style new wave or heavy metal tones. Adjust the time between each repeat from 10 ms to 1.5 ms. 
    • TIME: Adjust the length of time between each repeat. 
    • REPEATS: Adjust the number of repeats. For OG and MOD, you can go from one repeat to indefinite repeats (this is also kinda crazy, but hey, get creative).
    • DELAY MIX: Adjust the mix between your dry signal (non-affected tone) and the wet signal (delay-affected tone). This is the best way to keep your output sounding natural and cut through the mix with a band.
• 9V DC POWER INPUT: ARTIE is operated with 9-volt DC power; either a power adapter or a battery. The power adapter plug is a barrel connector and is standard for many guitar pedals. We recommend using a good-quality POWER ADAPTER. You can use a 9-volt battery plugged into the battery compartment inside the enclosure.
• AUDIO JACKS: 
  • INPUT JACK: This is a standard 1/4" audio jack. When there is no cable plugged into this jack, it cuts off the battery, so it saves the life of the battery.
  • OUTPUT JACK: This is a standard 1/4" MONO audio jack.

Quickly and Easily Adjust your Sounds: ARTIE displays a color-coded chart and arcs around the knobs! Learn more!